new init system

SD_ROOT/wz_mini/etc/init.d/S01bind

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+echo "replace stock busybox"
+mount --bind /opt/wz_mini/bin/busybox /bin/busybox
+
+echo "replace stock fstab"
+mount --bind /opt/wz_mini/etc/fstab /etc/fstab
+
+echo "replace stock inittab"
+mount --bind /opt/wz_mini/etc/inittab /etc/inittab
+
+echo "bind /etc/profile for local/ssh shells"
+mount --bind /opt/wz_mini/etc/profile /etc/profile
+
+if [ -d /lib/modules ]; then
+        echo "mount kernel modules"
+        mount --bind /opt/wz_mini/lib/modules /lib/modules
+fi

SD_ROOT/wz_mini/etc/init.d/S02tmpfs

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+echo "mount wz_mini tmpfs"
+mount -t tmpfs /opt/wz_mini/tmp
+
+echo "create workspace directory"
+mkdir /opt/wz_mini/tmp/.storage
+
+echo "mounting global tmpfs"
+mount -t tmpfs /tmp

SD_ROOT/wz_mini/etc/init.d/S03busybox

@@ -0,0 +1,24 @@
+#!/bin/sh
+
+set -x
+
+case "$1" in
+  start)
+
+        echo "install busybox applets"
+        mkdir /opt/wz_mini/tmp/.bin
+        /opt/wz_mini/bin/busybox --install -s /opt/wz_mini/tmp/.bin
+        ;;
+  stop)
+        ;;
+  restart|reload)
+        "$0" stop
+        "$0" start
+        ;;
+  *)
+        echo "Usage: $0 {start|stop|restart}"
+        exit 1
+esac
+
+exit $?
+

SD_ROOT/wz_mini/etc/init.d/S04model

@@ -0,0 +1,33 @@
+#!/bin/sh
+
+##DETECT CAMERA MODEL & PLATFORM TYPE
+#V2=WYZEC1-JZ
+#PANv1=WYZECP1_JEF
+#PANv2=HL_PAN2
+#V3=WYZE_CAKP2JFUS
+#DB3=WYZEDB3
+#V3C=ATOM_CamV3C
+
+#mtdblock9 only exists on the T20 platform, indicating V2 or PANv1
+if [ -b /dev/mtdblock9 ]; then
+        mkdir /opt/wz_mini/tmp/params
+        mount -t jffs2 /dev/mtdblock9 /opt/wz_mini/tmp/params
+        touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/params/config/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
+        touch /opt/wz_mini/tmp/.T20
+        umount /opt/wz_mini/tmp/params
+        rm -rf /opt/wz_mini/tmp/params
+elif [ -b /dev/mtdblock6 ]; then
+        mkdir /opt/wz_mini/tmp/configs
+        mount -t jffs2 /dev/mtdblock6 /opt/wz_mini/tmp/configs
+        touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/configs/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
+        touch /opt/wz_mini/tmp/.T31
+        umount /opt/wz_mini/tmp/configs
+        rm -rf /opt/wz_mini/tmp/configs
+fi
+
+#Check for Car FW
+if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
+        if cat /system/bin/app.ver | grep 4.55; then
+                touch /opt/wz_mini/tmp/.CAR
+        fi
+fi

SD_ROOT/wz_mini/etc/init.d/S05mount

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+if [ -f /opt/wz_mini/tmp/.T20 ]; then
+        mount -t jffs2 /dev/mtdblock4 /system
+elif [ -f /opt/wz_mini/tmp/.T31 ]; then
+        mount /dev/mtdblock3 /system
+fi

SD_ROOT/wz_mini/etc/init.d/S06gpio

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+#Set the correct GPIO for the audio driver (T31 only)
+if [ -f /opt/wz_mini/tmp/.HL_PAN2 ]; then
+        GPIO=7
+elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
+        GPIO=63
+fi
+

SD_ROOT/wz_mini/etc/init.d/S07inject

@@ -0,0 +1,52 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+set -x
+
+echo "copy stock rcS"
+cp /etc/init.d/rcS /opt/wz_mini/tmp/.storage/rcS
+
+sed -i '/^".*/aset -x' /opt/wz_mini/tmp/.storage/rcS
+
+sed -i '/^# Run init script.*/i/opt/wz_mini/etc/rc.d/K01network \&\n' /opt/wz_mini/tmp/.storage/rcS
+
+sed -i '/^# Run init script.*/i/opt/wz_mini/etc/rc.d/K03rcd\n' /opt/wz_mini/tmp/.storage/rcS
+
+sed -i '/sbin:/s/$/:\/opt\/wz_mini\/bin/' /opt/wz_mini/tmp/.storage/rcS
+sed -i '/system\/\lib/s/$/:\/opt\/wz_mini\/lib/' /opt/wz_mini/tmp/.storage/rcS
+
+#Custom PATH hooks
+#sed -i '/^# Run init script.*/i#Hook Library PATH here\nexport LD_LIBRARY_PATH=/tmp/test/lib:$LD_LIBRARY_PATH\n' /opt/wz_mini/tmp/.storage/rcS
+#sed -i '/^# Run init script.*/i#Hook system PATH here\nexport PATH=/tmp/test/bin:$PATH\n' /opt/wz_mini/tmp/.storage/rcS
+
+echo "Copy factory app_init.sh"
+cp /system/init/app_init.sh /opt/wz_mini/tmp/.storage/app_init.sh
+
+echo "Replace factory app_init.sh path"
+sed -i '/\/system\/init\/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
+sed -i '/Run init script.*/a /opt/wz_mini/tmp/.storage/app_init.sh \&\n' /opt/wz_mini/tmp/.storage/rcS
+sed -i '/\/system\/init\/app_init.sh/,+2d' /opt/wz_mini/tmp/.storage/rcS
+
+if [[ "$DEBUG_ENABLED" == "true" ]]; then
+        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
+        sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
+        touch /tmp/dbgflag
+
+elif [[ "$WEB_CAM_ENABLE" == "true" ]]; then
+        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
+        sed -i '/^# Run init/i/opt/wz_mini/etc/rc.d/K02_webcam &' /opt/wz_mini/tmp/.storage/rcS
+        touch /tmp/dbgflag
+
+elif [[ -d /opt/Upgrade ]]; then
+        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
+        sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
+        sed -i '/^# Mount configs.*/i/opt/wz_mini/bin/upgrade-run.sh &\n' /opt/wz_mini/tmp/.storage/rcS
+        touch /tmp/dbgflag
+fi
+
+##ENABLE LIBCALLBACK BY DEFAULT
+if [[ "$LIBCALLBACK_ENABLE" == "true" ]] || ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]); then
+        echo "set path for iCamera"
+        sed -i 's/\/system\/bin\/iCamera/\/opt\/wz_mini\/usr\/bin\/iCamera/g' /opt/wz_mini/tmp/.storage/app_init.sh
+fi

SD_ROOT/wz_mini/etc/init.d/S09firstboot

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [ -e /opt/wz_mini/etc/.first_boot ]; then
+        echo "first boot already completed"
+else
+        echo "first boot, initializing"
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+                #May need different gpio for PANv1
+                #We don't rmmod this module, as it is marked [permanent] by the kernel on T20
+                insmod /opt/wz_mini/lib/modules/3.10.14/extra/audio.ko sign_mode=0
+                LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/init_v2.wav $AUDIO_PROMPT_VOLUME
+        else
+                insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
+                /opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/init.wav $AUDIO_PROMPT_VOLUME
+                rmmod audio
+        fi
+fi
+
+if [ -f /opt/wz_mini/etc/.first_boot ]; then
+        echo "Not first_boot"
+else
+        echo "Set first_boot"
+        touch /opt/wz_mini/etc/.first_boot
+fi
+

SD_ROOT/wz_mini/etc/init.d/wz_post.sh → SD_ROOT/wz_mini/etc/init.d/S10kmod

@@ -1,78 +1,9 @@
 #!/bin/sh
 
-### This file is called by /etc/init.d/rcS, and is run before app_init.sh
-
-LOG_NAME=/opt/wz_mini/log/wz_post
-if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then
-    i=0
-    while [[ -e $LOG_NAME.log.$i || -L $LOG_NAME.log.$i ]] ; do
-        let i++
-    done
-        mv $LOG_NAME.log $LOG_NAME.log.$i
-    LOG_NAME=$LOG_NAME
-fi
-touch -- "$LOG_NAME".log
-exec 1> $LOG_NAME.log 2>&1
-
-set -x
-
-if [ -e /tmp/dbgflag ];then
-	echo "debug mode, disabled"
-	exit 0
-fi
-
-export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
-
-[ -f $WZMINI_CFG ] && source $WZMINI_CFG
-
-echo "welcome to wz_post.sh"
-echo "PID $$"
-
-#CAMERA CONFIGURATION FILES BACKUP
-if [ -d /opt/.wz_backup ]; then
-        echo "backup directory missing"
-else
-	echo "creating backup directory"
-        mkdir /opt/.wz_backup
-fi
-
-if [ -f /opt/wz_mini/tmp/.T31 ]; then
-        echo "T31 platform backup"
-        if [ -d /opt/.wz_backup/configs ]; then
-                echo "configs backup directory present, not backing up again"
-        else
-                echo "backup /configs"
-                cp -R /configs/ /opt/.wz_backup/
-        fi
-elif [ -f /opt/wz_mini/tmp/.T20 ]; then
-        echo "T20 platform backup"
-        if [ -d /opt/.wz_backup/configs ]; then
-                echo "configs backup directory present, not backing up again"
-        else
-                echo "backup /configs"
-                cp -R /configs/ /opt/.wz_backup/
-        fi
-
-        if [ -d /opt/.wz_backup/params ]; then
-                echo "configs backup directory present, not backing up again"
-        else
-                echo "backup /params"
-                cp -R /params/ /opt/.wz_backup/
-        fi
-fi
-
-#SWAP FILE, REQUIRED FOR OPERATION!
-if [[ "$ENABLE_SWAP" == "true" ]] && [[ -e /opt/wz_mini/swap ]]; then
-        echo "swap file found, enable"
-        swapon /opt/wz_mini/swap
-else
-        echo "swap file missing"
-fi
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
 
-if [ -d /lib/modules ]; then
-	echo "mount kernel modules"
-	mount --bind /opt/wz_mini/lib/modules /lib/modules
-fi
+set -x 
 
 ## REPLACE STOCK MODULES
 if [[ "$ENABLE_RTL8189FS_DRIVER" == "true" ]] || [[ "$ENABLE_RTL8189FS_DRIVER" == "" ]]; then
@@ -97,10 +28,9 @@ if [[ "$ENABLE_ATBM603X_DRIVER" == "true" ]] || [[ "$ENABLE_ATBM603X_DRIVER" ==
 	fi
 fi
 
-##ENABLE LIBCALLBACK BY DEFAULT
-if [[ "$LIBCALLBACK_ENABLE" == "true" ]] || ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]); then
-        echo "set path for iCamera"
-        sed -i 's/\/system\/bin\/iCamera/\/opt\/wz_mini\/usr\/bin\/iCamera/g' /opt/wz_mini/tmp/.storage/app_init.sh
+#Enable serial driver for car
+if [ -f /opt/wz_mini/tmp/.CAR ] || [[ "$ENABLE_CAR_DRIVER" == "true" ]]; then
+        modprobe cp210x
 fi
 
 #RTSP SERVER
@@ -132,22 +62,88 @@ if ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "tru
 	fi
 fi
 
-#MOTORIZED CAMERA CONTROL
-if [[ "$DISABLE_MOTOR" == "true" ]]; then
-	echo "Motor Disabled"
-	touch /opt/wz_mini/tmp/.ms
+
+if [[ "$ENABLE_NFSv4" == "true" ]]; then
+        insmod $KMOD_PATH/kernel/lib/oid_registry.ko
+        insmod $KMOD_PATH/kernel/net/dns_resolver/dns_resolver.ko
+        insmod $KMOD_PATH/kernel/fs/nfs/nfsv4.ko
+        insmod $KMOD_PATH/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
+        echo nfsv4 enabled
+else
+        echo nfsv4 disabled
 fi
 
-#Enable serial driver for car
-if [ -f /opt/wz_mini/tmp/.CAR ] || [[ "$ENABLE_CAR_DRIVER" == "true" ]]; then
-	modprobe cp210x
+if [[ "$ENABLE_IPTABLES" == "true"  ]]; then
+
+        insmod $KMOD_PATH/kernel/net/netfilter/x_tables.ko
+        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ip_tables.ko
+        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ipt_REJECT.ko
+        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_filter.ko
+        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_mangle.ko
+        echo "iptables ipv4 enabled"
+
+        if [[ "$ENABLE_IPV6" == "true" ]]; then
+                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6_tables.ko
+                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
+                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_filter.ko
+                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_mangle.ko
+                echo "iptables ipv6 enabled"
+        fi
+else
+        echo "iptables disabled"
+fi
+
+if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
+        insmod $KMOD_PATH/kernel/net/ipv4/tunnel4.ko
+        insmod $KMOD_PATH/kernel/net/ipv4/ip_tunnel.ko
+        insmod $KMOD_PATH/kernel/net/wireguard/wireguard.ko
 fi
 
-/opt/wz_mini/etc/init.d/wz_user.sh &
+if [[ "$ENABLE_CIFS" == "true" ]]; then
+        insmod $KMOD_PATH/kernel/fs/cifs/cifs.ko
+else
+        echo "cifs disabled"
+fi
+
+if [[ "$ENABLE_USB_STORAGE" == "true" ]]; then
+        insmod $KMOD_PATH/kernel/drivers/scsi/scsi_mod.ko
+        insmod $KMOD_PATH/kernel/drivers/scsi/sd_mod.ko
+        insmod $KMOD_PATH/kernel/drivers/usb/storage/usb-storage.ko
+else
+        echo "usb_storage disabled"
+fi
 
-##LIBRARY DEBUG
-#cp /opt/wz_mini/lib/uClibc.tar /tmp
-#tar -xf /tmp/uClibc.tar -C /tmp
-#mount --bind /tmp/lib /lib
-#cp /system/bin/iCamera /opt/wz_mini/tmp/.storage/
-#mount -o ro,bind /opt/wz_mini/usr/bin/iCamera-dbg /system/bin/iCamera
+if [[ "$ENABLE_EXT4" == "true" ]]; then
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+        insmod $KMOD_PATH/kernel/lib/crc16.ko
+        fi
+
+        insmod $KMOD_PATH/kernel/fs/jbd2/jbd2.ko
+        insmod $KMOD_PATH/kernel/fs/mbcache.ko
+        insmod $KMOD_PATH/kernel/fs/ext4/ext4.ko
+fi
+
+echo "bonding kernel module setup"
+if [[ "$BONDING_ENABLED" == "true" ]]; then
+	if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then
+        	BONDING_LINK_MONITORING_FREQ_MS="100"
+	fi
+	if [[ "$BONDING_DOWN_DELAY_MS" == "" ]]; then
+            BONDING_DOWN_DELAY_MS="5000"
+        fi
+        if [[ "$BONDING_UP_DELAY_MS" == "" ]]; then
+            BONDING_UP_DELAY_MS="5000"
+        fi
+        if [[ "$BONDING_PRIMARY_INTERFACE" == "" ]]; then
+            BONDING_PRIMARY_INTERFACE="eth0"
+        fi
+        if [[ "$BONDING_SECONDARY_INTERFACE" == "" ]]; then
+            BONDING_SECONDARY_INTERFACE="wlan0"
+        fi
+        if [[ "$BONDING_FAIL_OVER_MAC" == "" ]]; then
+            BONDING_FAIL_OVER_MAC="0"
+        fi
+
+	# Insert the bonding driver into the kernel
+	insmod $KMOD_PATH/kernel/drivers/net/bonding/bonding.ko mode=active-backup miimon="$BONDING_LINK_MONITORING_FREQ_MS" downdelay="$BONDING_DOWN_DELAY_MS" updelay="$BONDING_UP_DELAY_MS" primary="$BONDING_PRIMARY_INTERFACE" fail_over_mac="$BONDING_FAIL_OVER_MAC"
+fi

SD_ROOT/wz_mini/etc/init.d/S11configbackup

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+#CAMERA CONFIGURATION FILES BACKUP
+if [ -d /opt/.wz_backup ]; then
+        echo "backup directory missing"
+else
+        echo "creating backup directory"
+        mkdir /opt/.wz_backup
+fi
+
+if [ -f /opt/wz_mini/tmp/.T31 ]; then
+        echo "T31 platform backup"
+        if [ -d /opt/.wz_backup/configs ]; then
+                echo "configs backup directory present, not backing up again"
+        else
+                echo "backup /configs"
+                cp -R /configs/ /opt/.wz_backup/
+        fi
+elif [ -f /opt/wz_mini/tmp/.T20 ]; then
+        echo "T20 platform backup"
+        if [ -d /opt/.wz_backup/configs ]; then
+                echo "configs backup directory present, not backing up again"
+        else
+                echo "backup /configs"
+                cp -R /configs/ /opt/.wz_backup/
+        fi
+
+        if [ -d /opt/.wz_backup/params ]; then
+                echo "configs backup directory present, not backing up again"
+        else
+                echo "backup /params"
+                cp -R /params/ /opt/.wz_backup/
+        fi
+fi
+

SD_ROOT/wz_mini/etc/init.d/S12passwd

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+echo "replace stock password"
+cp /opt/wz_mini/etc/shadow /opt/wz_mini/tmp/.storage/shadow
+
+if [[ "$DEBUG_PASSWORD" == "true" ]]; then
+sed -i 's/:[^:]*/:/' /opt/wz_mini/tmp/.storage/shadow
+fi
+
+mount --bind /opt/wz_mini/tmp/.storage/shadow /etc/shadow
+chmod 400 /etc/shadow
+

SD_ROOT/wz_mini/etc/init.d/S14terminfo

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ -d /opt/wz_mini/usr/share/terminfo ]; then
+        echo "terminfo already present"
+else
+        echo "terminfo not present, extract"
+        tar xf /opt/wz_mini/usr/share/terminfo.tar -C /opt/wz_mini/usr/share/
+fi

SD_ROOT/wz_mini/etc/init.d/S15ssh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+echo "Run dropbear ssh server"
+/opt/wz_mini/bin/dropbear -R -s -g
+

SD_ROOT/wz_mini/etc/init.d/S16factorycheck

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+echo "replace factorycheck with dummy, to prevent bind unmount"
+if [ -f /opt/wz_mini/tmp/.T31 ]; then
+        mount --bind /opt/wz_mini/bin/factorycheck /system/bin/factorycheck
+	touch /tmp/usrflag
+fi

SD_ROOT/wz_mini/etc/init.d/S17motor

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+#MOTORIZED CAMERA CONTROL   
+if [[ "$DISABLE_MOTOR" == "true" ]]; then
+        echo "Motor Disabled"
+        touch /opt/wz_mini/tmp/.ms
+fi

SD_ROOT/wz_mini/etc/init.d/wz_init.sh

@@ -13,9 +13,8 @@ fi
 touch -- "$LOG_NAME".log
 exec 1> $LOG_NAME.log 2>&1
 
-export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
 
-[ -f $WZMINI_CFG ] && source $WZMINI_CFG
+set -x
 
 echo "welcome to wz_init.sh"
 echo "PID $$"
@@ -31,182 +30,28 @@ echo '
                  |______|
 '
 
-set -x
-
-echo "replace stock busybox"
-mount --bind /opt/wz_mini/bin/busybox /bin/busybox
-
-echo "replace stock fstab"
-mount --bind /opt/wz_mini/etc/fstab /etc/fstab
-
-echo "mount wz_mini tmpfs"
-mount -t tmpfs /opt/wz_mini/tmp
-
-echo "install busybox applets"
-mkdir /opt/wz_mini/tmp/.bin
-/opt/wz_mini/bin/busybox --install -s /opt/wz_mini/tmp/.bin
-
-##DETECT CAMERA MODEL & PLATFORM TYPE
-#V2=WYZEC1-JZ
-#PANv1=WYZECP1_JEF
-#PANv2=HL_PAN2
-#V3=WYZE_CAKP2JFUS
-#DB3=WYZEDB3
-#V3C=ATOM_CamV3C
-
-#mtdblock9 only exists on the T20 platform, indicating V2 or PANv1
-if [ -b /dev/mtdblock9 ]; then
-        mkdir /opt/wz_mini/tmp/params
-        mount -t jffs2 /dev/mtdblock9 /opt/wz_mini/tmp/params
-        touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/params/config/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
-        touch /opt/wz_mini/tmp/.T20
-        umount /opt/wz_mini/tmp/params
-        rm -rf /opt/wz_mini/tmp/params
-elif [ -b /dev/mtdblock6 ]; then
-        mkdir /opt/wz_mini/tmp/configs
-        mount -t jffs2 /dev/mtdblock6 /opt/wz_mini/tmp/configs
-        touch /opt/wz_mini/tmp/.$(cat /opt/wz_mini/tmp/configs/.product_config | grep PRODUCT_MODEL | sed -e 's#.*=\(\)#\1#')
-        touch /opt/wz_mini/tmp/.T31
-        umount /opt/wz_mini/tmp/configs
-        rm -rf /opt/wz_mini/tmp/configs
-fi
-
-#Set the correct GPIO for the audio driver (T31 only)
-if [ -f /opt/wz_mini/tmp/.HL_PAN2 ]; then
-        GPIO=7
-elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
-        GPIO=63
-fi
-
-if [ -e /opt/wz_mini/etc/.first_boot ]; then
-        echo "first boot already completed"
-else
-	echo "first boot, initializing"
-	if [ -f /opt/wz_mini/tmp/.T20 ]; then
-		#May need different gpio for PANv1
-		#We don't rmmod this module, as it is marked [permanent] by the kernel on T20
-		insmod /opt/wz_mini/lib/modules/3.10.14/extra/audio.ko sign_mode=0
-        	LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/init_v2.wav $AUDIO_PROMPT_VOLUME
-	else
-	        insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
-        	/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/init.wav $AUDIO_PROMPT_VOLUME
-        	rmmod audio
-	fi
-fi
-
-
-if [ -f /opt/wz_mini/etc/.first_boot ]; then
-	echo "Not first_boot"
-else
-	echo "Set first_boot"
-	touch /opt/wz_mini/etc/.first_boot
-fi
-
-echo "replace stock inittab"
-mount --bind /opt/wz_mini/etc/inittab /etc/inittab
-
-echo "bind /etc/profile for local/ssh shells"
-mount --bind /opt/wz_mini/etc/profile /etc/profile
-
-echo "mounting global tmpfs"
-mount -t tmpfs /tmp
-
-echo "mount system to replace factorycheck with dummy, to prevent bind unmount"
-if [ -f /opt/wz_mini/tmp/.T31 ]; then
-	mount /dev/mtdblock3 /system
-	mount --bind /opt/wz_mini/bin/factorycheck /system/bin/factorycheck
-fi
-
-touch /tmp/usrflag
-
-echo "create workspace directory"
-mkdir /opt/wz_mini/tmp/.storage
-
-echo "copy stock rcS"
-cp /etc/init.d/rcS /opt/wz_mini/tmp/.storage/rcS
-
-echo "add wz_post inject to stock rcS"
-sed -i '/^".*/aset -x' /opt/wz_mini/tmp/.storage/rcS
-sed -i '/^# Run init script.*/i/opt/wz_mini/etc/init.d/wz_post.sh\n' /opt/wz_mini/tmp/.storage/rcS
-
-sed -i '/sbin:/s/$/:\/opt\/wz_mini\/bin/' /opt/wz_mini/tmp/.storage/rcS
-sed -i '/system\/\lib/s/$/:\/opt\/wz_mini\/lib/' /opt/wz_mini/tmp/.storage/rcS
-
-#Custom PATH hooks
-#sed -i '/^# Run init script.*/i#Hook Library PATH here\nexport LD_LIBRARY_PATH=/tmp/test/lib:$LD_LIBRARY_PATH\n' /opt/wz_mini/tmp/.storage/rcS
-#sed -i '/^# Run init script.*/i#Hook system PATH here\nexport PATH=/tmp/test/bin:$PATH\n' /opt/wz_mini/tmp/.storage/rcS
-
-if [ -f /opt/wz_mini/tmp/.T20 ]; then
-        mount -t jffs2 /dev/mtdblock4 /system
-fi
-
-#Check for Car FW
-if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
-        if cat /system/bin/app.ver | grep 4.55; then
-                touch /opt/wz_mini/tmp/.CAR
-        fi
-fi
-
-echo "Copy factory app_init.sh"
-cp /system/init/app_init.sh /opt/wz_mini/tmp/.storage/app_init.sh
-
-echo "Replace factory app_init.sh path"
-sed -i '/\/system\/init\/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
-sed -i '/Run init script.*/a /opt/wz_mini/tmp/.storage/app_init.sh\n' /opt/wz_mini/tmp/.storage/rcS
-sed -i '/\/system\/init\/app_init.sh/,+2d' /opt/wz_mini/tmp/.storage/rcS
-
-echo "replace stock password"
-cp /opt/wz_mini/etc/shadow /opt/wz_mini/tmp/.storage/shadow
-
-if [[ "$DEBUG_PASSWORD" == "true" ]]; then
-sed -i 's/:[^:]*/:/' /opt/wz_mini/tmp/.storage/shadow
-fi
-
-mount --bind /opt/wz_mini/tmp/.storage/shadow /etc/shadow
-chmod 400 /etc/shadow
-
-if [[ -e /opt/wz_mini/swap.gz ]]; then
-        if [ -f /opt/wz_mini/tmp/.T20 ]; then
-        	LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/swap_v2.wav $AUDIO_PROMPT_VOLUME
-	else
-		insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
-		/opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/swap.wav $AUDIO_PROMPT_VOLUME
-		rmmod audio
-	fi
-	echo "swap archive present, extracting"
-        gzip -d /opt/wz_mini/swap.gz
-        mkswap /opt/wz_mini/swap
-	sync;echo 3 > /proc/sys/vm/drop_caches
-else
-	echo "swap archive missing, not extracting"
-fi
-
-if [ -d /opt/wz_mini/usr/share/terminfo ]; then
-	echo "terminfo already present"
-else
-	echo "terminfo not present, extract"
-	tar xf /opt/wz_mini/usr/share/terminfo.tar -C /opt/wz_mini/usr/share/
-
-fi
-
-echo "Run dropbear ssh server"
-/opt/wz_mini/bin/dropbear -R -s -g
-
-if [[ "$DEBUG_ENABLED" == "true" ]]; then
-        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
-        sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
-	touch /tmp/dbgflag
-
-elif [[ "$WEB_CAM_ENABLE" == "true" ]]; then
-        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
-        sed -i '/^# Run init/i/opt/wz_mini/etc/init.d/wz_cam.sh &' /opt/wz_mini/tmp/.storage/rcS
-	touch /tmp/dbgflag
-
-elif [[ -d /opt/Upgrade ]]; then
-        sed -i '/app_init.sh/,+4d' /opt/wz_mini/tmp/.storage/rcS
-        sed -i '/^# Run init/i/bin/sh /etc/profile' /opt/wz_mini/tmp/.storage/rcS
-	sed -i '/^# Mount configs.*/i/opt/wz_mini/bin/upgrade-run.sh &\n' /opt/wz_mini/tmp/.storage/rcS
-	touch /tmp/dbgflag
-fi
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /opt/wz_mini/etc/init.d/S??* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+        *.sh)
+            # Source shell script for speed.
+            (
+                trap - INT QUIT TSTP
+                set start
+                . $i
+            )
+            ;;
+        *)
+            # No sh extension, so fork subprocess.
+            $i start
+            ;;
+    esac
+done
 
 /linuxrc

SD_ROOT/wz_mini/etc/init.d/wz_user.sh

@@ -1,625 +0,0 @@
-#!/bin/sh
-
-LOG_NAME=/opt/wz_mini/log/wz_user
-if [[ -e $LOG_NAME.log || -L $LOG_NAME.log ]] ; then
-    i=0
-    while [[ -e $LOG_NAME.log.$i || -L $LOG_NAME.log.$i ]] ; do
-        let i++
-    done
-        mv $LOG_NAME.log $LOG_NAME.log.$i
-    LOG_NAME=$LOG_NAME
-fi
-touch -- "$LOG_NAME".log
-exec 1> $LOG_NAME.log 2>&1
-
-set -x
-
-echo "welcome to wz_user.sh"
-echo "PID $$"
-
-
-if [[ -e /tmp/dbgflag ]];then
-        echo "debug mode, disabled"
-        exit 0
-fi
-
-export WZMINI_CFG=/opt/wz_mini/wz_mini.conf
-
-[ -f $WZMINI_CFG ] && source $WZMINI_CFG
-
-hostname_set() {
-	echo "set hostname"
-	hostname $CUSTOM_HOSTNAME
-}
-
-first_run_check() {
-	if [ -e /opt/wz_mini/tmp/.wz_user_firstrun ]; then
-	echo "wz_user.sh already run once, exit."
-	exit 0
-	fi
-}
-
-store_mac() {
-	echo "store original mac"
-	cat /sys/class/net/wlan0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/wlan0_mac
-}
-
-wait_wlan() {
-##Check if the driver has been loaded for the onboard wlan0, store the MAC.
-    while true
-    do
-        if ifconfig wlan0 | grep "HWaddr"; then
-		echo "wlan0 hwaddr is up"
-	        store_mac
-		break
-        else
-	        echo "wlan0 hwaddr not ready yet..."
-        	sleep 5
-	fi
-    done
-}
-
-wpa_check() {
-##Check if wpa_supplicant has been created by iCamera
-	if [ -e /tmp/wpa_supplicant.conf ]; then
-		wait_wlan
-		echo "wpa_supplicant.conf ready"
-	else
-		echo "wpa_supplicant.conf not ready, wait some time for creation."
-		COUNT=0
-		ATTEMPTS=15
-		until [[ -e /tmp/wpa_supplicant.conf ]] || [[ $COUNT -eq $ATTEMPTS ]]; do
-		echo -e "$(( COUNT++ ))... \c"
-		sleep 5
-		wpa_check
-		done
-		if [[ $COUNT -eq $ATTEMPTS ]]; then
-			echo "time exceeded waiting for iCamera, continue potentially broken condition without network."
-		fi
-	fi
-}
-
-wlanold_check() {
-#Have we renamed interfaces yet?
-	if [ -d /sys/class/net/wlanold ]; then
-		echo "wlanold exist"
-		eth_wlan_up
-	else
-		echo "wlanold doesn't exist"
-                if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
-			rename_interface_and_setup_bonding bond0 "$BONDING_PRIMARY_INTERFACE" "$BONDING_SECONDARY_INTERFACE"
-		else
-			rename_interface $1
-		fi
-	fi
-}
-
-netloop() {
-##While loop for check
-        while true
-        do
-	wlanold_check $1
-        echo "wlan0 not ready yet..."
-        sleep 5
-        done
-}
-
-rename_interface() {
-##Fool iCamera by renaming the hardline interface to wlan0
-	echo "renaming interfaces"
-	ifconfig $1 down
-	ifconfig wlan0 down
-        /opt/wz_mini/bin/busybox ip link set wlan0 name wlanold
-        /opt/wz_mini/bin/busybox ip addr flush dev wlanold
-        /opt/wz_mini/bin/busybox ip link set $1 name wlan0
-	eth_wlan_up
-}
-
-rename_interface_and_setup_bonding() {
-##Fool iCamera by renaming the hardline interface to wlan0
-## $1 Bonding Interface, $2 Primary Interface, $3 Secondary Interface
-	bonding_interface=$1
-	primary_interface=$2
-	secondary_interface=$3
-
-	echo "renaming interfaces"
-
-	# Bring all interfaces down
-	ifconfig $bonding_interface down
-	ifconfig $primary_interface down
-	ifconfig $secondary_interface down
-
-	# Have to bring bonding interface up to be able to bond our slaves.
-	/opt/wz_mini/bin/busybox ip link set $bonding_interface up
-
-	# Rename the real wlan0 interface if needed/used
-	if [[ "$primary_interface" == "wlan0" ]]; then
-		/opt/wz_mini/bin/busybox ip link set $primary_interface name wlanold
-		/opt/wz_mini/bin/busybox ip addr flush dev wlanold
-		primary_interface="wlanold"
-		# Because we just changed the name of the primary interface, we need to
-		# tell the bonding driver about the name change as well.
-		echo "$primary_interface" > /sys/devices/virtual/net/$bonding_interface/bonding/primary
-	fi
-	if [[ "$secondary_interface" == "wlan0" ]]; then
-		/opt/wz_mini/bin/busybox ip link set $secondary_interface name wlanold
-		/opt/wz_mini/bin/busybox ip addr flush dev wlanold
-		secondary_interface="wlanold"
-	fi
-
-	# Enslave the Ethernet and Original Wifi interfaces
-	# under the bonding interface.
-	/opt/wz_mini/tmp/.bin/ifenslave $bonding_interface $primary_interface $secondary_interface
-
-	# Have to bring bonding interface down to be rename the interface
-	/opt/wz_mini/bin/busybox ip link set $bonding_interface down
-
-	# Name the bonding interface to be the "new" wlan0 interface
-	/opt/wz_mini/bin/busybox ip link set $bonding_interface name wlan0
-
-	# Bring the newly renamed wlan0 (actually the bond interface) back up
-	eth_wlan_up
-}
-
-bonding_setup() {
-echo "bonding kernel module setup"
-if [[ "$BONDING_ENABLED" == "true" ]]; then
-	if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then
-        	BONDING_LINK_MONITORING_FREQ_MS="100"
-	fi
-	if [[ "$BONDING_DOWN_DELAY_MS" == "" ]]; then
-            BONDING_DOWN_DELAY_MS="5000"
-        fi
-        if [[ "$BONDING_UP_DELAY_MS" == "" ]]; then
-            BONDING_UP_DELAY_MS="5000"
-        fi
-        if [[ "$BONDING_PRIMARY_INTERFACE" == "" ]]; then
-            BONDING_PRIMARY_INTERFACE="$1"
-        fi
-        if [[ "$BONDING_SECONDARY_INTERFACE" == "" ]]; then
-            BONDING_SECONDARY_INTERFACE="$2"
-        fi
-        if [[ "$BONDING_FAIL_OVER_MAC" == "" ]]; then
-            BONDING_FAIL_OVER_MAC="0"
-        fi
-
-	# Insert the bonding driver into the kernel
-	insmod $KMOD_PATH/kernel/drivers/net/bonding/bonding.ko mode=active-backup miimon="$BONDING_LINK_MONITORING_FREQ_MS" downdelay="$BONDING_DOWN_DELAY_MS" updelay="$BONDING_UP_DELAY_MS" primary="$BONDING_PRIMARY_INTERFACE" fail_over_mac="$BONDING_FAIL_OVER_MAC"
-fi
-}
-
-eth_wlan_up() {
-##Run DHCP client, and bind mount our fake wpa_cli.sh to fool iCamera
-        ifconfig wlan0 up
-	pkill udhcpc
-        udhcpc -i wlan0 -x hostname:$CUSTOM_HOSTNAME -p /var/run/udhcpc.pid -b
-
-    # If running with Interface Bonding enabled, kill any existing
-    # wpa_supplicant that might be running and spawn our own instead
-    if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
-        /opt/wz_mini/bin/busybox killall wpa_supplicant
-        wpa_supplicant -D nl80211 -i wlanold -c /tmp/wpa_supplicant.conf -B -s
-    fi
-
-	if [ -f /opt/wz_mini/tmp/.T20 ]; then
-        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
-	else
-        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
-	fi
-
-	break
-}
-
-swap_enable() {
-        if [ -e /opt/wz_mini/swap ]; then
-                echo "Swap file exists"
-                if cat /proc/swaps | grep "mini" ; then
-                        echo "Swap is already enabled"
-                else
-                        echo "Enable swap"
-                        swapon /opt/wz_mini/swap
-                fi
-        else
-                echo "Swap file missing!"
-        fi
-}
-
-dmesg_log() {
-
-DMESG_LOG=/opt/wz_mini/log/dmesg
-if [[ -e $DMESG_LOG.log || -L $DMESG_LOG.log ]] ; then
-    i=0
-    while [[ -e $DMESG_LOG.log.$i || -L $DMESG_LOG.log.$i ]] ; do
-        let i++
-    done
-        mv $DMESG_LOG.log $DMESG_LOG.log.$i
-    DMESG_LOG=$DMESG_LOG
-fi
-touch -- "$DMESG_LOG".log
-dmesg > $DMESG_LOG.log 2>&1
-
-}
-
-trim_logs() {
-
-echo "Deleting logs older than 5 boots..."
-
-find /opt/wz_mini/log -name '*log*' | while read file; do
-  [ "${file#/opt/wz_mini/log/*log.}" -gt 5 ] && rm -v "$file"
-done
-
-}
-
-first_run_check
-wpa_check
-
-#Set module dir depending on platform
-if [ -f /opt/wz_mini/tmp/.T20 ]; then
-	KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14"
-else
-	KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__"
-fi
-
-swap_enable
-
-if [[ "$ENABLE_IPV6" == "true" ]]; then
-	echo "ipv6 enabled"
-else
-	echo "ipv6 disabled"
-	sysctl -w net.ipv6.conf.all.disable_ipv6=1
-fi
-
-if [[ "$ENABLE_NFSv4" == "true" ]]; then
-        insmod $KMOD_PATH/kernel/lib/oid_registry.ko
-        insmod $KMOD_PATH/kernel/net/dns_resolver/dns_resolver.ko
-        insmod $KMOD_PATH/kernel/fs/nfs/nfsv4.ko
-        insmod $KMOD_PATH/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
-        echo nfsv4 enabled
-else
-        echo nfsv4 disabled
-fi
-
-if [[ "$ENABLE_IPTABLES" == "true"  ]]; then
-
-	insmod $KMOD_PATH/kernel/net/netfilter/x_tables.ko
-	insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ip_tables.ko
-	insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ipt_REJECT.ko
-	insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_filter.ko
-	insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_mangle.ko
-	echo "iptables ipv4 enabled"
-
-	if [[ "$ENABLE_IPV6" == "true" ]]; then
-		insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6_tables.ko
-		insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
-		insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_filter.ko
-		insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_mangle.ko
-		echo "iptables ipv6 enabled"
-	fi
-else
-	echo "iptables disabled"
-fi
-
-if [[ "$ENABLE_USB_ETH" == "true" ]]; then
-
-	insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
-
-	# Auto-Detect an Ethernet Driver and load it
-	if [[ "$ENABLE_USB_ETH_MODULE_AUTODETECT" == "true" ]]; then
-		for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
-			case $DEVICE in
-			'077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
-			'08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
-			'0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
-			'17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
-			'13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
-			'1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
-			'14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
-				echo "Loading ASIX Ethernet driver..."
-				modprobe asix
-				;;
-			'0b95:1790' | '0b95:178a' | '0df6:0072')
-				echo "Loading AX88179 Gigabit Ethernet driver..."
-				modprobe ax88179_178a
-				;;
-			'1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
-			'413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac')
-				echo "Loading USB CDC Ethernet driver..."
-				modprobe cdc_ether
-				;;
-			'0bda:8152')
-				echo "Loading Realtek RTL8152 driver..."
-				modprobe r8152
-				;;
-			esac
-		done
-	fi
-
-	# Manually load any other Ethernet Drivers if asked for
-	if [[ "$ENABLE_USB_ETH_MODULE_MANUAL" != "" ]]; then
-		for i in $(echo "$ENABLE_USB_ETH_MODULE_MANUAL" | tr "," "\n")
-		do
-			insmod $KMOD_PATH/kernel/drivers/net/usb/$i.ko
-		done
-	fi
-
-	bonding_setup eth0 wlan0
-
-	swap_enable
-
-	netloop eth0
-
-	else
-	echo "USB Ethernet disabled"
-fi
-
-if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
-
-        HOST_MACADDR=$(echo "$CUSTOM_HOSTNAME"|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
-
-        if [ -f /opt/wz_mini/tmp/.T20 ]; then
-		echo connect > /sys/devices/platform/jz-dwc2/dwc2/udc/dwc2/soft_connect
-		sleep 1
-		devmem 0x10000040 32 0x0b800096
-		sleep 1
-		devmem 0x13500000 32 0x001100cc
-	else
-		#Set dwc2 ID_PIN driver memory
-		devmem 0x13500000 32 0x001100cc
-		devmem 0x10000040 32 0x0b000096
-		#wipe the bits to set the ID_PIN, only for the V3.
-		devmem 0x10000040 32 0x0b000FFF
-	fi
-
-	insmod $KMOD_PATH/kernel/drivers/usb/gadget/libcomposite.ko
-
-        if [ -f /opt/wz_mini/tmp/.T31 ]; then
-	insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/u_ether.ko
-	insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/usb_f_ncm.ko
-	fi
-
-	insmod $KMOD_PATH/kernel/drivers/usb/gadget/g_ncm.ko iManufacturer=wz_mini_ncm host_addr="$HOST_MACADDR" dev_addr="$USB_DIRECT_MAC_ADDR"
-
-	sleep 1
-
-	bonding_setup usb0 wlan0
-
-	swap_enable
-
-	netloop usb0
-
-	else
-	echo "USB Direct disabled"
-fi
-
-if [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
-        if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
-                echo "RNDIS is not compatible with ENABLE_USB_ETH or ENABLE_USB_DIRECT.  Please enable only ENABLE_USB_RNDIS"
-        else
-
-                insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
-                insmod $KMOD_PATH/kernel/drivers/net/usb/cdc_ether.ko
-                insmod $KMOD_PATH/kernel/drivers/net/usb/rndis_host.ko
-
-                sleep 1
-
-                swap_enable
-
-                netloop usb0
-
-        fi
-else
-        echo "usb rndis disabled"
-fi
-
-if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
-	insmod $KMOD_PATH/kernel/net/ipv4/tunnel4.ko
-	insmod $KMOD_PATH/kernel/net/ipv4/ip_tunnel.ko
-	insmod $KMOD_PATH/kernel/net/wireguard/wireguard.ko
-
-	if [[ "$WIREGUARD_IPV4" != "" ]]; then
-
-		if [ -d /opt/wz_mini/etc/wireguard ]; then
-			echo "wireguard dir exists"
-		else
-			mkdir -p /opt/wz_mini/etc/wireguard
-		fi
-
-	if [ ! -f /opt/wz_mini/etc/wireguard/privatekey ]; then
-		(umask 277 && /opt/wz_mini/bin/wg  genkey | /opt/wz_mini/bin/busybox tee /opt/wz_mini/etc/wireguard/privatekey | /opt/wz_mini/bin/wg  pubkey > /opt/wz_mini/etc/wireguard/publickey)
-	fi
-
-	/opt/wz_mini/bin/busybox ip link add dev wg0 type wireguard
-	/opt/wz_mini/bin/busybox ip address add dev wg0 "$WIREGUARD_IPV4"
-	/opt/wz_mini/bin/wg set wg0 private-key /opt/wz_mini/etc/wireguard/privatekey
-	/opt/wz_mini/bin/busybox ip link set wg0 up
-	fi
-
-	if [[ "$WIREGUARD_PEER_PUBLIC_KEY" != "" ]] && [[ "$WIREGUARD_PEER_ALLOWED_IPS" != "" ]] && [[ "$WIREGUARD_PEER_ENDPOINT" != "" ]] && [[ "$WIREGUARD_PEER_KEEP_ALIVE" != "" ]]; then
-		/opt/wz_mini/bin/wg set wg0 peer "$WIREGUARD_PEER_PUBLIC_KEY" allowed-ips "$WIREGUARD_PEER_ALLOWED_IPS" endpoint "$WIREGUARD_PEER_ENDPOINT" persistent-keepalive "$WIREGUARD_PEER_KEEP_ALIVE"
-		/opt/wz_mini/bin/busybox ip route add "$WIREGUARD_PEER_ALLOWED_IPS" dev wg0
-	fi
-else
-	echo "wireguard disabled"
-fi
-
-if [[ "$ENABLE_CIFS" == "true" ]]; then
-	insmod $KMOD_PATH/kernel/fs/cifs/cifs.ko
-else
-	echo "cifs disabled"
-fi
-
-if [[ "$ENABLE_USB_STORAGE" == "true" ]]; then
-	insmod $KMOD_PATH/kernel/drivers/scsi/scsi_mod.ko
-	insmod $KMOD_PATH/kernel/drivers/scsi/sd_mod.ko
-	insmod $KMOD_PATH/kernel/drivers/usb/storage/usb-storage.ko
-else
-	echo "usb_storage disabled"
-fi
-
-if [[ "$ENABLE_EXT4" == "true" ]]; then
-        if [ -f /opt/wz_mini/tmp/.T20 ]; then
-	insmod $KMOD_PATH/kernel/lib/crc16.ko
-	fi
-
-	insmod $KMOD_PATH/kernel/fs/jbd2/jbd2.ko
-	insmod $KMOD_PATH/kernel/fs/mbcache.ko
-	insmod $KMOD_PATH/kernel/fs/ext4/ext4.ko
-else
-	echo "ext4 disabled"
-fi
-
-if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
-	mkdir /tmp/Upgrade
-	mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
-	#Setting this host causes iCamera to segfault, lets ignore it for now
-	#echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /opt/wz_mini/tmp/.storage/hosts
-	#mount --bind /opt/wz_mini/tmp/.storage/hosts /etc/hosts
-        /opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
-else
-        mkdir /tmp/Upgrade
-        /opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
-fi
-
-if [[ "$REMOTE_SPOTLIGHT" == "true" ]]; then
-	/opt/wz_mini/bin/socat pty,link=/dev/ttyUSB0,raw tcp:"$REMOTE_SPOTLIGHT_HOST":9000 &
-	echo "remote accessory enabled"
-else
-	echo "remote accessory disabled"
-fi
-
-if [[ "$ENABLE_MP4_WRITE" == "true" ]]; then
-        if [ -f /opt/wz_mini/tmp/.T20 ]; then
-		echo "mp4_write is not supported on T20"
-	else
-		/opt/wz_mini/bin/cmd mp4write on
-		echo "mp4_write enabled"
-	fi
-else
-	echo "mp4 write disabled"
-fi
-
-if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
-
-        if [ -f /opt/wz_mini/tmp/.T20 ]; then
-	HI_VIDEO_DEV="/dev/video6"
-	else
-	HI_VIDEO_DEV="/dev/video1"
-	fi
-
-	swap_enable
-
-	if [[ "$RTSP_PASSWORD" = "" ]]; then
-	RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
-	fi
-
-	/opt/wz_mini/bin/cmd video 0 on
-
-        if [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]; then
-		/opt/wz_mini/bin/cmd audio 0 on
-		AUDIO_CH="-C 1"
-		AUDIO_FMT="-a S16_LE"
-		DEVICE1="$HI_VIDEO_DEV,hw:0,0"
-        else
-                DEVICE1="$HI_VIDEO_DEV"
-		echo "rtsp audio disabled"
-        fi
-
-else
-        echo "rtsp disabled"
-
-fi
-
-
-if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
-
-	if [ -f /opt/wz_mini/tmp/.T20 ]; then
-	LOW_VIDEO_DEV="/dev/video7"
-	else
-	LOW_VIDEO_DEV="/dev/video2"
-	fi
-
-	swap_enable
-
-	/opt/wz_mini/bin/cmd video 1 on
-
-	if [[ "$RTSP_PASSWORD" = "" ]]; then
-	RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
-	fi
-
-        if [[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]]; then
-		/opt/wz_mini/bin/cmd audio 1 on
-		AUDIO_CH="-C 1"
-		AUDIO_FMT="-a S16_LE"
-		DEVICE2="$LOW_VIDEO_DEV,hw:2,0"
-        else
-                DEVICE2="$LOW_VIDEO_DEV"
-                echo "rtsp audio disabled"
-        fi
-
-else
-        echo "rtsp disabled"
-
-fi
-
-if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
-	echo "delay RTSP for iCamera"
-	#This delay is required. Sometimes, if you start the rtsp server too soon, live view will break on the app.
-	sleep 5
-	LD_LIBRARY_PATH=/opt/wz_mini/lib /opt/wz_mini/bin/v4l2rtspserver $AUDIO_CH $AUDIO_FMT -F0 -U "$RTSP_LOGIN":"$RTSP_PASSWORD" -P "$RTSP_PORT" $DEVICE1 $DEVICE2 &
-	sleep 1
-        echo "Set imp variables via helper"
-        /opt/wz_mini/usr/bin/imp_helper.sh > /dev/null 2>&1 &
-fi
-
-if ([[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]) && [[ "$RTMP_STREAM_ENABLED" == "true" ]] && ([[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]] || [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]); then
-	if [[ "$RTMP_STREAM_DISABLE_AUDIO" == "true" ]]; then
-		RTMP_AUDIO="no_audio"
-	fi
-	echo "delay RTMP server"
-	#Follow the delay from the RTSP server
-	sleep 5
-	/opt/wz_mini/bin/rtmp-stream.sh "$RMTP_STREAM_SERVICE" "$RTMP_AUDIO" &
-fi
-
-if [[ "$NIGHT_DROP_DISABLE" == "true" ]]; then
-	touch /opt/wz_mini/tmp/.nd
-fi
-
-if [[ "$ENABLE_LOCAL_DNS" == "true" ]]; then
-	dnsmasq -C /opt/wz_mini/etc/dnsmasq.conf
-	rm -f /tmp/resolv.conf
-	cp /opt/wz_mini/etc/resolv.conf /tmp/resolv.conf
-fi
-
-if [[ "$WEB_SERVER_ENABLED" == "true" ]]; then
-        httpd -p 80 -h /opt/wz_mini/www
-fi
-
-hostname_set
-touch /opt/wz_mini/tmp/.wz_user_firstrun
-pkill -f dumpload #Kill dumpload so it won't waste cpu or ram gathering cores and uploading them when something crashes
-sysctl -w kernel.core_pattern='|/bin/false'
-dmesg_log
-trim_logs
-sync;echo 3 > /proc/sys/vm/drop_caches
-
-
-if [ -f "$CUSTOM_SCRIPT_PATH" ]; then
-	echo "starting custom script"
-	$CUSTOM_SCRIPT_PATH &
-else
-	echo "no custom script configured in wz_mini.conf"
-fi
-
-echo "searching for custom scripts in /opt/wz_mini/etc/rc.local.d"
-if [ -d "${1:-/opt/wz_mini/etc/rc.local.d}" ] ; then
-  for filename in $(find /opt/wz_mini/etc/rc.local.d/ -name "*.sh" | /opt/wz_mini/bin/busybox sort) ; do
-    if [ -f "${filename}" ] && [ -x "${filename}" ]; then
-      echo "running ${filename}"
-      "${filename}" &
-    fi
-  done
-fi
-echo "finished executing custom scripts from /opt/wz_mini/etc/rc.local.d"
-
-echo "wz_user.sh done" > /dev/kmsg

SD_ROOT/wz_mini/etc/network/S01wlanhw

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+    while true
+    do
+        if ifconfig wlan0 | grep "HWaddr"; then
+                echo "wlan0 hwaddr is up"
+                break
+        else
+                echo "wlan0 hwaddr not ready yet..."
+                sleep 5
+        fi
+    done
+

SD_ROOT/wz_mini/etc/network/S03ipv6

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_IPV6" == "true" ]]; then
+        echo "ipv6 enabled"
+else
+        echo "ipv6 disabled"
+        sysctl -w net.ipv6.conf.all.disable_ipv6=1
+fi

SD_ROOT/wz_mini/etc/network/S04wireguard

@@ -0,0 +1,32 @@
+#!/bin/sh 
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
+
+	if [[ "$WIREGUARD_IPV4" != "" ]]; then
+
+		if [ -d /opt/wz_mini/etc/wireguard ]; then
+			echo "wireguard dir exists"
+		else
+			mkdir -p /opt/wz_mini/etc/wireguard
+		fi
+
+	if [ ! -f /opt/wz_mini/etc/wireguard/privatekey ]; then
+		(umask 277 && /opt/wz_mini/bin/wg  genkey | /opt/wz_mini/bin/busybox tee /opt/wz_mini/etc/wireguard/privatekey | /opt/wz_mini/bin/wg  pubkey > /opt/wz_mini/etc/wireguard/publickey)
+	fi
+
+	/opt/wz_mini/bin/busybox ip link add dev wg0 type wireguard
+	/opt/wz_mini/bin/busybox ip address add dev wg0 "$WIREGUARD_IPV4"
+	/opt/wz_mini/bin/wg set wg0 private-key /opt/wz_mini/etc/wireguard/privatekey
+	/opt/wz_mini/bin/busybox ip link set wg0 up
+	fi
+
+	if [[ "$WIREGUARD_PEER_PUBLIC_KEY" != "" ]] && [[ "$WIREGUARD_PEER_ALLOWED_IPS" != "" ]] && [[ "$WIREGUARD_PEER_ENDPOINT" != "" ]] && [[ "$WIREGUARD_PEER_KEEP_ALIVE" != "" ]]; then
+		/opt/wz_mini/bin/wg set wg0 peer "$WIREGUARD_PEER_PUBLIC_KEY" allowed-ips "$WIREGUARD_PEER_ALLOWED_IPS" endpoint "$WIREGUARD_PEER_ENDPOINT" persistent-keepalive "$WIREGUARD_PEER_KEEP_ALIVE"
+		/opt/wz_mini/bin/busybox ip route add "$WIREGUARD_PEER_ALLOWED_IPS" dev wg0
+	fi
+else
+	echo "wireguard disabled"
+fi

SD_ROOT/wz_mini/etc/network/S08hostname

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+echo "set hostname to $CUSTOM_HOSTNAME"
+hostname $CUSTOM_HOSTNAME

SD_ROOT/wz_mini/etc/network/S09dnsmasq

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_LOCAL_DNS" == "true" ]]; then
+	dnsmasq -C /opt/wz_mini/etc/dnsmasq.conf
+	rm -f /tmp/resolv.conf
+	cp /opt/wz_mini/etc/resolv.conf /tmp/resolv.conf
+fi
+

SD_ROOT/wz_mini/etc/network/S10httpd

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$WEB_SERVER_ENABLED" == "true" ]]; then
+        httpd -p 80 -h /opt/wz_mini/www
+fi
+

SD_ROOT/wz_mini/etc/network/S14storemac

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+
+wait_for_wlan_ip
+
+echo "store original mac"
+cat /sys/class/net/wlan0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/wlan0_mac
+

SD_ROOT/wz_mini/etc/network/S15v4l2rtspserver

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
+
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+	HI_VIDEO_DEV="/dev/video6"
+	else
+	HI_VIDEO_DEV="/dev/video1"
+	fi
+
+	if [[ "$RTSP_PASSWORD" = "" ]]; then
+	RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
+	fi
+
+	/opt/wz_mini/bin/cmd video 0 on
+
+        if [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]; then
+		/opt/wz_mini/bin/cmd audio 0 on
+		AUDIO_CH="-C 1"
+		AUDIO_FMT="-a S16_LE"
+		DEVICE1="$HI_VIDEO_DEV,hw:0,0"
+        else
+                DEVICE1="$HI_VIDEO_DEV"
+		echo "rtsp audio disabled"
+        fi
+
+else
+        echo "rtsp disabled"
+
+fi
+
+
+if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
+
+	if [ -f /opt/wz_mini/tmp/.T20 ]; then
+	LOW_VIDEO_DEV="/dev/video7"
+	else
+	LOW_VIDEO_DEV="/dev/video2"
+	fi
+
+	/opt/wz_mini/bin/cmd video 1 on
+
+	if [[ "$RTSP_PASSWORD" = "" ]]; then
+	RTSP_PASSWORD=$(cat /opt/wz_mini/tmp/wlan0_mac)
+	fi
+
+        if [[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]]; then
+		/opt/wz_mini/bin/cmd audio 1 on
+		AUDIO_CH="-C 1"
+		AUDIO_FMT="-a S16_LE"
+		DEVICE2="$LOW_VIDEO_DEV,hw:2,0"
+        else
+                DEVICE2="$LOW_VIDEO_DEV"
+                echo "rtsp audio disabled"
+        fi
+
+else
+        echo "rtsp disabled"
+
+fi
+
+if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
+	echo "delay RTSP for iCamera"
+	#This delay is required. Sometimes, if you start the rtsp server too soon, live view will break on the app.
+	sleep 5
+	LD_LIBRARY_PATH=/opt/wz_mini/lib /opt/wz_mini/bin/v4l2rtspserver $AUDIO_CH $AUDIO_FMT -F0 -U "$RTSP_LOGIN":"$RTSP_PASSWORD" -P "$RTSP_PORT" $DEVICE1 $DEVICE2 &
+	sleep 1
+        echo "Set imp variables via helper"
+        /opt/wz_mini/usr/bin/imp_helper.sh > /dev/null 2>&1 &
+fi
+
+sync;echo 3 > /proc/sys/vm/drop_caches

SD_ROOT/wz_mini/etc/network/S16rtmp

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if ([[ "$RTSP_LOW_RES_ENABLED" == "true" ]] || [[ "$RTSP_HI_RES_ENABLED" == "true" ]]) && [[ "$RTMP_STREAM_ENABLED" == "true" ]] && ([[ "$RTSP_LOW_RES_ENABLE_AUDIO" == "true" ]] || [[ "$RTSP_HI_RES_ENABLE_AUDIO" == "true" ]]); then
+	if [[ "$RTMP_STREAM_DISABLE_AUDIO" == "true" ]]; then
+		RTMP_AUDIO="no_audio"
+	fi
+	echo "delay RTMP server"
+	#Follow the delay from the RTSP server
+	sleep 5
+	/opt/wz_mini/bin/rtmp-stream.sh "$RMTP_STREAM_SERVICE" "$RTMP_AUDIO" &
+fi
+

SD_ROOT/wz_mini/etc/rc.common

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+#Set module dir depending on platform
+if [ -f /opt/wz_mini/tmp/.T20 ]; then
+	KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14"
+else
+	KMOD_PATH="/opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__"
+fi
+
+if [[ "$ENABLE_USB_ETH" == "true" ]]; then
+        ALT_IFACE=eth0
+elif [[ "$ENABLE_USB_DIRECT" == "true" ]] || [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
+	ALT_IFACE=usb0
+fi
+
+if [[ "$ENABLE_USB_ETH_ORIGINAL_MAC" == "true" ]]; then
+	CONFIG="inet addr"
+else
+	CONFIG="HWaddr"
+fi
+
+wait_for_wlan() {
+while true; do
+        if ifconfig wlan0 | grep "$CONFIG"; then
+            break
+        fi
+
+        echo " network not ready yet, try again in 5"
+        sleep 5
+done
+}
+
+wait_for_wlan_ip() {
+while true; do
+        if ifconfig wlan0 | grep "inet addr"; then
+            break
+        fi
+
+        echo " network not ready yet, try again in 5"
+        sleep 5
+done
+}

SD_ROOT/wz_mini/etc/rc.d/K01network

@@ -0,0 +1,61 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+wait_for_wlan
+
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /opt/wz_mini/etc/network/S??* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+        *.sh)
+            # Source shell script for speed.
+            (
+                trap - INT QUIT TSTP
+                set start
+                . $i
+            )
+            ;;
+        *)
+            # No sh extension, so fork subprocess.
+            $i start
+            ;;
+    esac
+done
+
+
+for i in /opt/wz_mini/etc/rc.local.d/* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+        *.sh)
+            # Source shell script for speed.
+            (
+                trap - INT QUIT TSTP
+                set start
+                . $i
+            )
+            ;;
+        *)
+            # No sh extension, so fork subprocess.
+            $i start
+            ;;
+    esac
+done
+
+
+if [ -f "$CUSTOM_SCRIPT_PATH" ]; then
+        echo "starting custom script"
+        $CUSTOM_SCRIPT_PATH &
+else
+        echo "no custom script configured in wz_mini.conf"
+fi
+echo "wz_mini done" > /dev/kmsg

SD_ROOT/wz_mini/etc/rc.d/K03rcd

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /opt/wz_mini/etc/rc.d/S??* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+        *.sh)
+            # Source shell script for speed.
+            (
+                trap - INT QUIT TSTP
+                set start
+                . $i
+            )
+            ;;
+        *)
+            # No sh extension, so fork subprocess.
+            $i start
+            ;;
+    esac
+done

SD_ROOT/wz_mini/etc/rc.d/S01swap

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [ -e /opt/wz_mini/swap.gz ]; then
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+                LD_LIBRARY_PATH='/opt/wz_mini/lib' /opt/wz_mini/bin/audioplay_t20 /opt/wz_mini/usr/share/audio/swap_v2.wav $AUDIO_PROMPT_VOLUME
+        else
+                insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/audio.ko spk_gpio=$GPIO alc_mode=0 mic_gain=0
+                /opt/wz_mini/bin/audioplay_t31 /opt/wz_mini/usr/share/audio/swap.wav $AUDIO_PROMPT_VOLUME
+                rmmod audio
+        fi
+        echo "swap archive present, extracting"
+        gzip -d /opt/wz_mini/swap.gz
+        mkswap /opt/wz_mini/swap
+        sync;echo 3 > /proc/sys/vm/drop_caches
+else
+        echo "swap archive missing, not extracting"
+fi
+
+#SWAP FILE, REQUIRED FOR OPERATION!
+if [[ "$ENABLE_SWAP" == "true" ]] && [[ -e /opt/wz_mini/swap ]]; then
+        echo "swap file found, enable"
+        /opt/wz_mini/bin/busybox swapon /opt/wz_mini/swap
+else
+        echo "swap file missing"
+fi

SD_ROOT/wz_mini/etc/rc.d/S02nightdrop

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$NIGHT_DROP_DISABLE" == "true" ]]; then
+	touch /opt/wz_mini/tmp/.nd
+fi

SD_ROOT/wz_mini/etc/rc.d/S03ethernet

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_USB_ETH" == "true" ]]; then
+
+        insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
+
+        # Auto-Detect an Ethernet Driver and load it
+        if [[ "$ENABLE_USB_ETH_MODULE_AUTODETECT" == "true" ]]; then
+                for DEVICE in `lsusb | awk '{print $6}'| tr '[:upper:]' '[:lower:]'`; do
+                        case $DEVICE in
+                        '077b:2226' | '0846:1040' | '2001:1a00' | '0b95:1720' | '07b8:420a' |\
+                        '08dd:90ff' | '0557:2009' | '0411:003d' | '0411:006e' | '6189:182d' |\
+                        '0df6:0056' | '07aa:0017' | '1189:0893' | '1631:6200' | '04f1:3008' |\
+                        '17ef:7203' | '0b95:772b' | '0b95:7720' | '0b95:1780' | '0789:0160' |\
+                        '13b1:0018' | '1557:7720' | '07d1:3c05' | '2001:3c05' | '2001:1a02' |\
+                        '1737:0039' | '04bb:0930' | '050d:5055' | '05ac:1402' | '0b95:772a' |\
+                        '14ea:ab11' | '0db0:a877' | '0b95:7e2b' | '0b95:172a' | '066b:20f9')
+                                echo "Loading ASIX Ethernet driver..."
+                                modprobe asix
+                                ;;
+                        '0b95:1790' | '0b95:178a' | '0df6:0072')
+                                echo "Loading AX88179 Gigabit Ethernet driver..."
+                                modprobe ax88179_178a
+                                ;;
+                        '1004:61aa' | '046d:c11f' | '1410:b001' | '1410:9010' | '413c:8195' |\
+                        '413c:8196' | '413c:819b' | '16d5:650a' | '12d1:14ac')
+                                echo "Loading USB CDC Ethernet driver..."
+                                modprobe cdc_ether
+                                ;;
+                        '0bda:8152')
+                                echo "Loading Realtek RTL8152 driver..."
+                                modprobe r8152
+                                ;;
+                        esac
+                done
+        fi
+
+        # Manually load any other Ethernet Drivers if asked for
+        if [[ "$ENABLE_USB_ETH_MODULE_MANUAL" != "" ]]; then
+                for i in $(echo "$ENABLE_USB_ETH_MODULE_MANUAL" | tr "," "\n")
+                do
+                        insmod $KMOD_PATH/kernel/drivers/net/usb/$i.ko
+                done
+        fi
+
+        cat /sys/class/net/eth0/address | tr '[:lower:]' '[:upper:]' > /opt/wz_mini/tmp/eth0_mac
+
+        else
+	        echo "USB Ethernet disabled"
+fi

SD_ROOT/wz_mini/etc/rc.d/S04usbdirect

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
+
+        HOST_MACADDR=$(echo "$CUSTOM_HOSTNAME"|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
+
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+                echo connect > /sys/devices/platform/jz-dwc2/dwc2/udc/dwc2/soft_connect
+                sleep 1
+                devmem 0x10000040 32 0x0b800096
+                sleep 1
+                devmem 0x13500000 32 0x001100cc
+        else
+                #Set dwc2 ID_PIN driver memory
+                devmem 0x13500000 32 0x001100cc
+                devmem 0x10000040 32 0x0b000096
+                #wipe the bits to set the ID_PIN, only for the V3.
+                devmem 0x10000040 32 0x0b000FFF
+        fi
+
+        insmod $KMOD_PATH/kernel/drivers/usb/gadget/libcomposite.ko
+
+        if [ -f /opt/wz_mini/tmp/.T31 ]; then
+        insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/u_ether.ko
+        insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/gadget/usb_f_ncm.ko
+        fi
+
+        insmod $KMOD_PATH/kernel/drivers/usb/gadget/g_ncm.ko iManufacturer=wz_mini_ncm host_addr="$HOST_MACADDR" dev_addr="$USB_DIRECT_MAC_ADDR"
+
+        else
+	        echo "USB Direct disabled"
+fi

SD_ROOT/wz_mini/etc/rc.d/S05rndis

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
+        if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
+                echo "RNDIS is not compatible with ENABLE_USB_ETH or ENABLE_USB_DIRECT.  Please enable only ENABLE_USB_RNDIS"
+        else
+
+                insmod $KMOD_PATH/kernel/drivers/net/usb/usbnet.ko
+                insmod $KMOD_PATH/kernel/drivers/net/usb/cdc_ether.ko
+                insmod $KMOD_PATH/kernel/drivers/net/usb/rndis_host.ko
+
+        fi
+else
+        echo "usb rndis disabled"
+fi

SD_ROOT/wz_mini/etc/rc.d/S06networkalt

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+alternate_iface() {
+
+wait_for_wlan
+
+if ! [[ "$BONDING_ENABLED" == "true" ]]; then
+    
+	if [[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]] || [[ "$ENABLE_USB_RNDIS" == "true" ]]; then
+
+	##Fool iCamera by renaming the hardline interface to wlan0
+        echo "renaming interfaces"
+        ifconfig $ALT_IFACE down
+        ifconfig wlan0 down
+        /opt/wz_mini/bin/busybox ip link set wlan0 name wlanold
+        /opt/wz_mini/bin/busybox ip addr flush dev wlanold
+        /opt/wz_mini/bin/busybox ip link set $ALT_IFACE name wlan0
+
+        ifconfig wlan0 up
+        pkill udhcpc
+        udhcpc -i wlan0 -x hostname:$CUSTOM_HOSTNAME -p /var/run/udhcpc.pid -b
+
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+	        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
+        else
+	        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
+	fi
+
+	else
+		echo "no alt iface enabled"
+	fi
+fi
+}
+
+alternate_iface &

SD_ROOT/wz_mini/etc/rc.d/S07bonding

@@ -0,0 +1,77 @@
+#!/bin/sh
+
+source /opt/wz_mini/etc/rc.common
+source /opt/wz_mini/wz_mini.conf
+
+set -x
+
+bonding_setup() {
+
+#we need to wait until wlan0 is up
+wait_for_wlan
+
+	##Fool iCamera by renaming the hardline interface to wlan0
+
+	## $1 Bonding Interface, $2 Primary Interface, $3 Secondary Interface
+        echo "renaming interfaces"
+
+        # Bring all interfaces down
+        ifconfig bond0 down
+        ifconfig $BONDING_PRIMARY_INTERFACE down
+        ifconfig $BONDING_SECONDARY_INTERFACE down
+
+        # Have to bring bonding interface up to be able to bond our slaves.
+        /opt/wz_mini/bin/busybox ip link set bond0 up
+
+        # Rename the real wlan0 interface if needed/used
+        if [[ "$BONDING_PRIMARY_INTERFACE" == "wlan0" ]]; then
+                /opt/wz_mini/bin/busybox ip link set $BONDING_PRIMARY_INTERFACE name wlanold
+                /opt/wz_mini/bin/busybox ip addr flush dev wlanold
+                primary_interface="wlanold"
+                # Because we just changed the name of the primary interface, we need to
+                # tell the bonding driver about the name change as well.
+                echo "$BONDING_PRIMARY_INTERFACE" > /sys/devices/virtual/net/bond0/bonding/primary
+        fi
+        if [[ "$BONDING_SECONDARY_INTERFACE" == "wlan0" ]]; then
+                /opt/wz_mini/bin/busybox ip link set $BONDING_SECONDARY_INTERFACE name wlanold
+                /opt/wz_mini/bin/busybox ip addr flush dev wlanold
+                secondary_interface="wlanold"
+        fi
+
+        # Enslave the Ethernet and Original Wifi interfaces
+        # under the bonding interface.
+        /opt/wz_mini/tmp/.bin/ifenslave bond0 $BONDING_PRIMARY_INTERFACE $BONDING_SECONDARY_INTERFACE
+
+        # Have to bring bonding interface down to be rename the interface
+        /opt/wz_mini/bin/busybox ip link set bond0 down
+
+        # Name the bonding interface to be the "new" wlan0 interface
+        /opt/wz_mini/bin/busybox ip link set bond0 name wlan0
+
+        # Bring the newly renamed wlan0 (actually the bond interface) back up
+
+
+##Run DHCP client, and bind mount our fake wpa_cli.sh to fool iCamera
+        ifconfig wlan0 up
+        pkill udhcpc
+        udhcpc -i wlan0 -x hostname:$CUSTOM_HOSTNAME -p /var/run/udhcpc.pid -b
+
+    # If running with Interface Bonding enabled, kill any existing
+    # wpa_supplicant that might be running and spawn our own instead
+
+    if [[ "$BONDING_ENABLED" == "true" ]] && ([[ "$ENABLE_USB_ETH" == "true" ]] || [[ "$ENABLE_USB_DIRECT" == "true" ]]); then
+        /opt/wz_mini/bin/busybox killall wpa_supplicant
+        wpa_supplicant -D nl80211 -i wlanold -c /tmp/wpa_supplicant.conf -B -s
+    fi
+
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /system/bin/wpa_cli
+        else
+        mount -o bind /opt/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
+        fi
+        
+}
+
+if [[ "$BONDING_ENABLED" == "true" ]]; then
+	bonding_setup &
+fi      

SD_ROOT/wz_mini/etc/rc.d/S09coredump

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+core() {
+	while ! pgrep -f "dumpload" > /dev/null; do
+		pkill -f dumpload #Kill dumpload so it won't waste cpu or ram gathering cores and uploading them when something crashes
+	done
+}
+
+sysctl -w kernel.core_pattern='|/bin/false'
+core &

SD_ROOT/wz_mini/etc/rc.d/S10firmware

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
+        mkdir /tmp/Upgrade
+        mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
+        #Setting this host causes iCamera to segfault, lets ignore it for now
+        #echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /opt/wz_mini/tmp/.storage/hosts
+        #mount --bind /opt/wz_mini/tmp/.storage/hosts /etc/hosts
+        /opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
+else
+        mkdir /tmp/Upgrade
+        /opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp:n > /dev/null 2>&1 &
+fi

SD_ROOT/wz_mini/etc/rc.d/S11mp4write

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$ENABLE_MP4_WRITE" == "true" ]]; then
+        if [ -f /opt/wz_mini/tmp/.T20 ]; then
+                echo "mp4_write is not supported on T20"
+        else
+                /opt/wz_mini/bin/cmd mp4write on
+                echo "mp4_write enabled"
+        fi
+else
+        echo "mp4 write disabled"
+fi

SD_ROOT/wz_mini/etc/rc.d/S12remoteaccessory

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+source /opt/wz_mini/wz_mini.conf
+
+if [[ "$REMOTE_SPOTLIGHT" == "true" ]]; then
+        /opt/wz_mini/bin/socat pty,link=/dev/ttyUSB0,raw tcp:"$REMOTE_SPOTLIGHT_HOST":9000 &
+        echo "remote accessory enabled"
+else
+        echo "remote accessory disabled"
+fi

SD_ROOT/wz_mini/wz_mini.conf

@@ -12,6 +12,7 @@ WEB_CAM_FPS_RATE="25"
 CUSTOM_HOSTNAME="WCV3"
 
 ENABLE_USB_ETH="false"
+ENABLE_USB_ETH_ORIGINAL_MAC="false"
 ENABLE_USB_ETH_MODULE_AUTODETECT="true"
 ENABLE_USB_ETH_MODULE_MANUAL=""